(Kit depicted above similar but not exact)
This unit is designed to stand in front of any opening, covering both the opening and any adjacent trim. The unit will attach to the wall via a valance mounted above the opening. The unit pivots and rolls on a base attached to the floor. The door consists of four panels, two sets of two panels on each side that are hinged in the center with a piano hinge. Each set will open out and to the side like a bi-fold door.
In the closed position, the back of the bookcase will sit 2” out from the wall. This gives the unit room to maneuver and clear trim or moulding up to ¾” thick. If necessary, this gap can be covered by attaching a piece of trim directly to the wall after the unit has been installed.
Total width: 108-120” Bookcase depth: 8”
DIY Hardware Kit $518.00 Shipping (USA): $57
Includes detailed instructions.