Includes detailed instructions.
This unit is designed to stand in front of any opening, covering both the opening and any adjacent trim. The unit will attach to the wall through use of a valance mounted above the opening. The panel pivots on a base attached to the floor, out and away from the wall.
In the closed position, the back of the bookcase will sit 2” out from the wall. This gives the unit room to maneuver and clear trim or moulding up to ¾” thick. If necessary, this gap can be covered on either side by attaching a piece of trim directly to the wall after the unit has been installed.
Total width: 0-36” Bookcase depth: 8”
DIY Hardware Kit $149.00 Shipping (USA): $37